Radial EXTC 500 Interface

Balanced interface for guitar effects pedals
Separate send & receive level controls optimize signal path
Transformer isolation to eliminate hum and buzz from ground loops
Creative tool incorporates effects pedals into your mix

Find user guide here

Reamp® and mix through your guitar pedals

The EXTC-500 is a 500 series module that allows you to get creative with your effects pedals, using them in your mix on any recorded track. Add a touch of distortion or chorus to a lead vocal, flange on a violin, or fuzz on piano – the possibilities are endless. The EXTC-500 takes the line level balanced output of your recording interface and converts it so an instrument level high-Z output optimized for guitar effects pedals, so you can Reamp any track through your pedalboard with ease. Once you’ve run the signal through your pedals, connect the output back into the EXTC and it will boost it up to a balanced line level so you can connect directly to the input of your recording interface. The EXTC features Radial’s class-A buffer for the best audio quality and transformer isolation to eliminate any buzz or hum – so you can focus your attention on using your pedals in new and exciting applications.

Specifications
Audio circuit type: Solid state with transformer coupled effects loop
Frequency response: Dry: 10Hz ~ 21kHz 0dBu, -3dBu | Wet: 10Hz ~ 21kHz 0dBu, -3dBu
Dynamic range: Dry: 94dB | Wet: >99dB
Gain: Dry: +5dB | Wet: +27dB
Total harmonic distortion: Dry: <0.0006% 0dBu output | Wet: <0.0012% 0dB output Intermodulation Distortion: Dry: -117dBu | Wet: -110dBu Signal to Noise: Dry: 94dB | Wet: >99dB
Maximum Input: Dry: +26dBu | Wet: +20dBu
Current Draw: 60mA, +/-16VDC
Features
180° polarity reverse, OmniPort
Input Connectors: 1/4″, XLR
Output Connectors: 1/4″, XLR
General
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable